Teac TN-300

Turntable section
Drive System	Belt Drive
Motor	DC Motor
Speed	33 1/3 RPM, 45 RPM
Rotation Speed Variation	+/–2%
Wow and Flutter	0.2%
Signal-to-Noise Ratio	67dB or higher (A-weighted, 20kHz LPF) 60dB or higher (unweighted, 20kHz LPF)
Platter	Aluminum Die-cast
Diameter of Platter	12", 30cm
Tonearm section
Type	Static Balance, Straight
Effective Arm Length	8.8", 223mm
Stylus Pressure Range	0 to 5g
Supported Cartridge Weight	3.5 to 6.5g
Anti-skating Adjustment	Supported
Cartridge section
Type	MM type (audio-technica AT95E factory installed)
Stylus Shape	Elliptical
Stylus Construction	Bonded Round Shank
Mount	Half inch
Frequency Response	20Hz to 20kHz
Channel Separation	20dB at 1kHz
Channel Balance	2.0dB
Tracking Force	1.5 to 2.5g
Vertical Tracking Angle	20 degrees
Supported Load Impedance	47k ohms
Output Voltage	3.5mV (1kHz, 5cm/sec.)
Stylus Pressure	2.0g +/–0.5g
Cartridge Weight	5.7g +/–0.5g
Head-shell Weight	10g (including Screws, Nuts and Wires)
Replacement Stylus	audio-technica ATN95E
Phono Equalizer Amplifier
Type of Amplifier	MM type (On/Thru switchable)
Analog Output
Connector	RCA Pin jack (Gold-plated)
Output Voltage	Phono/Line switchable
Phono Output	4.5mV +/–3dB
Line Output	120mV (–13dBV)
USB Output section
Connector	USB B type
Output Signal	PCM 48kHz/16-bit
Supported OS	Windows 7, Windows 8, Windows 8.1, Windows 10 OS X Lion (10.7), OS X Mountain Lion (10.8), OS X Mavericks (10.9), OS X Yosemite (10.10), OS X El Capitan (10.11)
Power	AC 100 to 240V, 50/60Hz
Power Consumption	1.5W (less than 0.5W at Standby)
Overall Dimensions (W x H x D)	16.5" x 4.6" x 14.0" 420 x 117 x 356 mm
Weight	Approx. 10.8 lbs. 4.9 kg
Accessories	Rubber Sheet, EP Adapter, Counter Weight, Head-shell (audio-technica AT95E), Platter, Dust Cover, Rubber Feet fro Dust Cover x2, Hinge x2, RCA Audio Cable, AC Adapter (GPE053A-120050-Z), Owner's Manual (including Warranty Card)

Rega RP78

Teac TN-300