Pro-Ject Juke Box E
Skivspelare och receiver i ett! Utrustad med ett inbyggt slutsteg, analoga ingångar och Bluetooth - det ända du behöver är högtalare!
Även utrustad med pre-out för att koppla på t.ex subwoofer, extra slutsteg eller aktiva högtalare!
Audiophile “All-in-one Plug & Play“ turntable system
“All-in-one Plug & Play” turntable system with Bluetooth, line input & easiest possible set-up!
Juke Box E is a record player, phono stage, Bluetooth receiver, line pre-amplifier and power amplifier in one, requiring only a pair of speakers to make a complete system. If you thought that a starter turntable system is complicated to set up, Juke Box E proves the contrary. This good sounding belt-drive deck offers the fastest possible installation process because it comes pre-adjusted out of the box and offers superb sound quality.
Tracking force and anti-skating of the turntable section are carefully pre-set. An acrylic dust cover is included. The “All-in-one turntable system” is available in high-gloss black, red or white colour.
The Juke Box Highpower Supply is available optionally. It features up to 50% more peak power output, increasing dynamic and bass response. The true ground connection over a 3 pin power plug can dramatically reduce hum and noise under critical power conditions.
- Instant playback with super-easy setup
- High contrast display on top
- Bluetooth and 1 line input
- Line record output
- Gold plated sockets
- Pre-adjusted tracking force & anti-skating force
- Ortofon OM5e cartridge, pre-mounted
- 8.6” aluminium tonearm with sapphire bearings
- Belt drive with silicone belt
- Low vibration synchronous motor & DC power supply
- Special feet for effective decoupling
- IR remote control included
- Colour options: HG Black, HG White, HG Red
|Power output||2 x 50 Wats (4 Ohm)|
|Outputs||Speakers, Line out (fixed), Phono out|
|Inputs||Bluetooth, 1x Line (analogue)|
|Speed||33, 45 (manual speed change)|
|Speed variance||33: 0.8% 45: 0.7%|
|Wow & flutter||33: 0.29% 45: 0.27%|
|Platter||300 mm plywood with felt mat|
|Main bearing||Stainless steel in bronze bushing|
|Effective arm length||218.5 mm|
|Effective tonearm mass||8.0 g|
|Counterweight for mass||3 - 5.5g (pre-mounted)|
|Tracking force range||0 - 25mN (OM5e 18mN pre-adjusted)|
|Included accessory||Power supply, dust cover, remote control|
|Power consumption||110W max|
|Dimensions||415 x 118 x 334mm (WxHxD)|
|Weight||5 kg net|
|Artikelnummer||Pro-Ject Juke Box E|